HUD-B609-S Tek Kolon Mukavemet Test Makinesi
- Açıklama
Açıklama
Model: HUD-B609-S | Single Column Tensile Test Machine
ÜRÜN BİLGİSİ
HUD-B609-S Tek Kolon Mukavemet Test Makinesi: zengin uygulamalara sahiptir, kullanıcıların seçmesi için 1000’den fazla malzemenin test gereksinimlerini karşılayabilen 100’den fazla farklı numune fikstürü yapılandırılmıştır; Farklı kullanıcı malzemeleri için “HUD Markamız” farklı kullanıcıların test gereksinimlerini karşılamak için özelleştirilmiş hizmetler de sağlar.
Teknik Özellikler | |
Yük kapasitesi | 5-200kg |
Load cell | TECSIS load cell (Almanya) |
Motor | 400w Panasonic servo motor |
Actuator | 400w servo actuator |
Vida sistemi | Vidalı mil |
Kontrol sİstemİ | PC windows 7 ile 10 sistem |
Test hızı | 0.1-500mm/min (ayarlanabilir) |
Dikey test alanı | 900mm (Çeneler dahil) |
Yük çözünürlüğü | 1/250,000 |
Yük doğruluğu | ≤0.5% |
Kuvvet birimleri | gf/kgf/N//kN/LBf/T |
Dış boyut | (L*W*H)515*520*1250mm |
Ağırlık | Yaklaşık 68KG |
BAZI UYGULAMA ÖRNEKLERİ
Basic application | Extended application (Need special accessories or restructuring) | |||
Tensile strength and deformation rate | Breaking force of ampoule | Film puncture force | Puncture force of lid of infusion bag with lid | Puncture/pulling force of soft rubber stopper |
Breaking force | Combination cover opening force | ZD bottle cap tearing force | Oral fluid lid tearing force | Oral fluid cap puncture/pulling force |
Heat seal strength | Pulling force of infusion bag cover inclined at 90 degrees | Pull-out force of lid for infusion bag with lid | 23 degree tilting cap pulling force | Piercing/pulling force with bottle cap and stopper |
Tear resistance | 90 degree peel force of tape | Perfect bound pages tearing force | 90 degree water-based plaster peeling force | Adhesive tearing force |
180 degree peel | Adhesive strength test (soft) | Adhesive strength test (hard) | Peeling force of hose cap | Catheter and catheter joint disengagement force |
90 degree peel | Makeup brush bristles pulling force | Toothbrush bristles pulling force | Rope breaking force | Jelly cup and yogurt cup opening force |
Fixed tensile test | Milk cup cup film peeling force | Extraction force of rubber plug | 45 degree peeling force of bottle film | Ziplock bag mouth pull
force |
Down test | Magnetic card core peeling force | 90 degree peeling force of magnetic card | Heat-sealing film tearing force | Protective film separation force |
Puncture retention | Release paper separation force | Trouser tearing force | Unwinding force of tape | Pressure resistance of plastic bottles |
STANDARTLAR
Adhesives Tape/Pressure Sensitive Tape
- EN 1719: Loop Tack Test
- ASTM D3654: Shear Adhesion Test
- ASTM D3759: Tensile &Elongation Test
- FTM: 180&90 Degree Peel Test, Loop Tack
- EN 1939, ASTM D3330: 180&90 Degree Peel Test
- ISO 11339, ASTM D1876, ASTM F2256: T-type Peel Test
Adhesive
- ASTM D903: Peel & Stripping Test
- ASTM D1002: Shear Strength (Adhesive for metal to metal)
- ISO 4587: Tensile lap-shear strength (Rigid-to-rigid bonded assemblies)
Film/Plastic Film
- ASTM D882: Tensile Test
- ASTM F1306: Puncture Test
- ASTM D1938: Trouser Tear Test
- ASTM D2732: Thermal Shrinkage Test
- ASTM D1709, ISO 7765-1: Free-Falling Dart Method
- ASTM D1894: Static and Kinetic Coefficients of Friction
- ASTM D1424, ASTM D1922, ISO 1974: Elmendorf Tearing Strength Test
Plastic& Plastic Pipe
- ISO 180: Izod Impact Test
- ISO 9966: Ring Stiffness Test
- ISO 179: Charpy Impact Test
- ISO 4892: Weathering Aging Test
- ASTM D3163: Plastic Lap-Shear Test
- ISO 4422, ISO 3127: Pipe Impact Test
- ASTM D4565, ISO 11357, EN 728: DSC/OIT
- ISO 75: Heat Deflection Temperature (HDT)
- ASTM D1598: Hydrostatic Pressure and Burst Test
- ISO 1133, ASTM D1238: Melt Flow Rate Test (MFR/MVR)
- ASTM D790, ISO 178, ISO 14125, ASTM D6272: Bend Test
- ISO 306, ASTM D1525: Vicat Softening Temperature (VST)
- ASTM D882, ASTM D 638, ISO 527, ASTM D1708: Tensile Test
Rubber
- ASTM D412, ISO 37-2005, JIS K6251, DIN 53504-2009: Tensile Strength & Elongation Test
- ASTM D1149-07, ASTM D1171-99, ISO 7326, ISO1431-1, DIN 53509-1: Ozone Aging Test
- ASTM D624-00, ISO 34-1: Tearing strength Test
- ASTM D395-03, ISO 815-1: Compression Set Test
- ASTM D2240-05, ISO 7619-1, JIS K6253, ISO 868: Shore Hardness Type A/D
- ASTM D573, ASTM D865, ISO188 Method B, DIN 53508 High/ Low Temperature Test
- ISO 2781(Method A): Density Test
- ASTM D5289-95/ ISO6502: No-Rotor Rheometer/Curemeter
- ASTM D1646: Mooney Viscometer
Foam
- ASTM D3574 Test E, ASTM D1623, ISO 1798: Tensile Test
- ASTM D3574 Test F, ISO 8067: Tear Test
- ASTM D3574 Test A: Density Test
- ASTM D3574 Test B1, ISO 2439: IFD Test
- ASTM D3574 Test H: Resilience (Ball Rebound) Test
- ASTM D3574 Test I3: Dynamic Fatigue Test by Constant Force
Metal
- ASTM E8, EN 10002-1,ASTM A370: Tensile Test
- ASTM A370: Bend Test
- ASTM B-117, ISO 3768: Salt Spray Test
- ISO 6508: Rockwell Hardness Test
- ISO 6507: Vickers Hardness Test
- ISO 6506, ASTM E10-14: Brinell Hardness
- ASTM E23, ISO148: Impact Test
Daha Detaylı bilgi için lütfen irtibata geçiniz…